The Black Rhino

Show off your rig! Tell us about your Jeep from start to where it's at right now and don't forget pictures!
Post Reply
User avatar
Max
WWJ Admin
Posts: 10
Joined: July 11th, 2018, 5:44 pm
Location: Carson City, NV
Contact:

The Black Rhino

Post by Max » July 13th, 2018, 1:50 pm

The Black Rhino
IMG_1426e1.jpg
IMG_1426e1.jpg (127.61 KiB) Viewed 117 times
1994 Jeep Wrangler (YJ)
4.0 liter 5spd
4" lift (2" body, 2" shackle, stock springs)
4.56 Yukon Gears
Rear Ox Locker (currently not functioning) / Open Front
CAD Delete (solid axle shafts from a ZJ)
33" Toyo Open Country M/T
Exterior & Interior Rhino Liner
Rancho Shocks
Rear Corner Protection
Warn front bumper
Smittybilt XRC Tube Fenders
Viair Constant Duty Onboard Air using 1/4 OD plastic air lines & rear quick connect
Bestop Seats Front/Rear
Grant Steering Wheel

Lighting:
See HERE for more info on the lights

Plans
- Winch
- Ford 8.8 rear swap
- Possible SOA configuration
- SYE & custom driveshaft
- Gear upgrade
- 35" tires

Repairs
- HVAC (system is jacked, somebody had a few and went to town under the dash)
- Ball joints (worn, but functional)
- Drag link seized
- Rear Locker, needs actuator (previous owner removed it... don't know why)

Just a quick write up to get a post in here!!

TBC.....

-M
Attachments
20180714_143146small.jpg
20180714_143146small.jpg (123.92 KiB) Viewed 195 times
20180715_205013small.jpg
20180715_205013small.jpg (33.12 KiB) Viewed 195 times
20180608_191727small.jpg
20180608_191727small.jpg (60.94 KiB) Viewed 211 times
20180619_180630small.jpg
20180619_180630small.jpg (223.18 KiB) Viewed 217 times

Post Reply